Home
Back

MATERIAL SAFETY DATA SHEET

EMU OIL                                                                                                                    Page 1:3

IDENTIFICATION

 Product Name:                     EMU OIL

Manufacturers code:             N202     

Customer Specification:

  

PHYSICAL PROPERTIES

 Description:      At 20*C it is a semi-solid white mass, at 60*C a practically clear yellow, colored liquid. No odor.           

 

Boiling Point: 150 deg C                                                                      Refractive Index; 1.457

Vapor Pressure: Not available                                                            Saponification Value: 194.1

Specific Gravity: 0.95                                                                           Peroxide Value: 0

Flashpoint: >140 deg C                                                                       Iodine Value 72.2

Solubility in water: Insoluble                                                             Ester Value

Water Content: 0.04% w/w                                                 Free Fatty Acid: .07

Acid Value: 0.64

 

                                         

  

MATERIAL SAFETY DATA SHEET

EMU OIL     

                                                                                                                                                             Page 2:3

HEALTH HAZARD INFORMATION

 

 

PRECAUTIONS FOR USE

 

  

 

MATERIAL SAFETY DATA SHEET

EMU OIL                                                    

                                                                                                                                                            Page 3:3

SAFE HANDLING INFORMATION

 

Storage & Transportation:             Emu Oil is an edible oil and should not pose problems with transportation or storage. However, it should not

be stored or transported with toxic chemicals, flammable gases,        

explosives, oxidizing agents and spontaneously combustible

substances. Store in a cool area and keep containers closed to

avoid contamination from impurities.

 

Spills & Disposal:                          Contain using sand or earth and use as an absorbent (sand,                  sawdust, vermiculite) where appropriate. Collect and seal in properly labeled containers for disposal. Wash area down with excess water. Waste material may be incinerated under controlled conditions where permitted. Refer to local Waste Management Authority Regulations for other approval methods.

 

Fire & Explosion Hazard               Remove containers from path of fire. Heating can cause expansion and rupture of containers. Keep containers cool with water spray.

 

Extinguishing Media:                      Carbon dioxide, dry chemical powder, BCF or alcohol stable foam.

 

  

Contact Point:

LB Processors

1864 Mosley Ferry Rd.

Chapmansboro , Tn. 37035

Phone #  (615) 746-8485

Fax # (615) 746- 9489

 

 

DISCLAIMER

 

All reasonable care has been taken to ensure information and advice contained in the data sheet are accurate at time of printing. However, LB Processors, LLC accepts no liability for any loss or damages suffered as consequence of reliance on the information contained herein.

 

 

Approved by:                                         Date: